Electronics
Find precision circuit board laminators that apply adhesive and flex circuits to rigidizers and applicators that apply special tapes like Kapton.
T-627 Flat Surface Tape Applicator
The T-627 Tape Applicator is designed to apply a wide variety of pressure-sensitive tapes to flat surfaces. Tape strips can be applied continuously or short strips with gaps can be applied to each product as required. This tape applicator can be mounted over a moving product, along a conveyor, or used on custom-designed taping equipment moving the tape head across the product.
SD-625 Tape Pad Applicator
The SD-625 Pressure-Sensitive Tape Pad Applicator is an economical method to automatically feed, cut, and apply pressure-sensitive tapes. It has a machine cycle time between 40-60 cycles per minute and a tape length tolerance of +1/16 inches, depending upon the length and type of tape.
DD-250 Dual Drum Flex Circuit Laminator
The DD-250 Dual Drum Flex Circuit Laminator is designed to laminate flexible circuits to heat sinks accurately. It has a flex circuit size minimum of 2” wide x 3½” long and a maximum of 17” wide x 10½” long, depending on the tooling pin location. Larger sizes are available for special applications. The machine application rate is .10”-10” per second.
T-628 Flat Surface Tape Applicator
The T-628 Tape Applicator is designed to apply a wide variety of pressure-sensitive tape to flat surfaces. Tape strips can be applied continuously or short strips with gaps can be applied to each product as required. This tape applicator can be mounted over a moving product on a conveyor or used on custom-designed taping equipment moving the tape head across the product.
SD-658-1 Tape Applicator
The SD-658-1-Tape Applicator is designed to apply various lengths of pressure-sensitive (VHB, foam, or butyl) tapes with the liner removed or the liner in place. A rotary knife provides a smooth cut on the ends of the tape. The applicator applies tape to a moving product or can be traversed across the product, which pulls the tape from the applicator. Depending on the product, it has variable speeds of up to 40 feet per minute.
SD-610 Robot-Mounted Tape Applicator
The SD-610 Robot-Mounted Tape Applicator is designed to handle the demands of 6-axis tape application with robot end-of-arm tooling in mind. The applicator is intended to be mounted on a robot wrist joint. The recommended minimum robot size is 10 kilograms, not limited to depending on the application. Available for ¼ inch (6 millimeters), 3/8 inch (10 millimeters), ½ inch (12 millimeters), ¾ inch (18 millimeters), and 1 inch (25 millimeters) wide tape. Custom widths are available upon request.
Discover What Straub Design Can Build With You
Give us a challenge. We'll deliver the tape application system or web converting system that's exactly what your business requires. Our engineers have created many custom solutions, from simple machines to complex systems. Contact or give us a call at 952-546-6686 to get started.