Skip to content

952-546-6686

  • Home
  • Product Inquiry Form
  • Parts & Services
  • Home
  • About
    • Trade Shows & Events
  • Solutions
    • Custom Packaging Applications
    • Rapid Response
    • Tape Applications Video Gallery
  • Case Studies
  • Tape Solutions
  • Tape Solutions
    • Packaging
    • Tabbing
    • Tear Strip
    • Protective
    • VHB Butyl & Foam Tape
    • Insulating
    • Heat Bond–Heat Activated
    • Conductive
    • Pavement Marking
  • Packaging
  • New Products
    • SD-4 Conveyor
  • Custom Solutions
    • Custom Packaging Applications
  • Contact Us

Solar

Our applicators and systems can apply single or multiple lanes of tape in line and crosswise on glass and stainless steel solar panels. Tapes can be insulating, conductive and sealing like VHB or Butyl.

  • All
  • Industry

T-628 Flat Surface Tape Applicator

The T-628 Tape Applicator is designed to apply a wide variety of pressure-sensitive tape to flat surfaces. Tape strips can be applied continuously or short strips with gaps can be applied to each product as required. This tape applicator can be mounted over a moving product on a conveyor or used on custom-designed taping equipment moving the tape head across the product.

T-628 Flat Surface Tape Applicator

The T-628 Tape Applicator is designed to apply a wide variety of pressure-sensitive tape to flat surfaces. Tape strips can be applied continuously or short strips with gaps can be applied to each product as required. This tape applicator can be mounted over a moving product on a conveyor or used on custom-designed taping equipment moving the tape head across the product.

SD-625 Tape Pad Applicator

The SD-625 Pressure-Sensitive Tape Pad Applicator is an economical method to automatically feed, cut, and apply pressure-sensitive tapes. It has a machine cycle time between 40-60 cycles per minute and a tape length tolerance of +1/16 inches, depending upon the length and type of tape.

SD-625 Tape Pad Applicator

The SD-625 Pressure-Sensitive Tape Pad Applicator is an economical method to automatically feed, cut, and apply pressure-sensitive tapes. It has a machine cycle time between 40-60 cycles per minute and a tape length tolerance of +1/16 inches, depending upon the length and type of tape.

T-627 Flat Surface Tape Applicator

The T-627 Tape Applicator is designed to apply a wide variety of pressure-sensitive tapes to flat surfaces. Tape strips can be applied continuously or short strips with gaps can be applied to each product as required. This tape applicator can be mounted over a moving product, along a conveyor, or used on custom-designed taping equipment moving the tape head across the product.

T-627 Flat Surface Tape Applicator

The T-627 Tape Applicator is designed to apply a wide variety of pressure-sensitive tapes to flat surfaces. Tape strips can be applied continuously or short strips with gaps can be applied to each product as required. This tape applicator can be mounted over a moving product, along a conveyor, or used on custom-designed taping equipment moving the tape head across the product.

SD-658-1 Tape Applicator

The SD-658-1-Tape Applicator is designed to apply various lengths of pressure-sensitive (VHB, foam, or butyl) tapes with the liner removed or the liner in place. A rotary knife provides a smooth cut on the ends of the tape. The applicator applies tape to a moving product or can be traversed across the product, which pulls the tape from the applicator. Depending on the product, it has variable speeds of up to 40 feet per minute.

SD-658-1 Tape Applicator

The SD-658-1-Tape Applicator is designed to apply various lengths of pressure-sensitive (VHB, foam, or butyl) tapes with the liner removed or the liner in place. A rotary knife provides a smooth cut on the ends of the tape. The applicator applies tape to a moving product or can be traversed across the product, which pulls the tape from the applicator. Depending on the product, it has variable speeds of up to 40 feet per minute.

SD-6 Conveyor System

The SD-6 Conveyor System is designed as a universal conveyor and control system to accommodate a variety of Straub Design tape applicators to apply pressure-sensitive tapes. The system can be configured for a variety of widths and lengths. One or more tape applicators can be mounted to the system, with an application speed of up to 100 feet per minute (30.5 m/min). Standard widths are 4 inch and 6 inch. Systems can be configured to accommodate additional widths upon request.

SD-6 Conveyor System

The SD-6 Conveyor System is designed as a universal conveyor and control system to accommodate a variety of Straub Design tape applicators to apply pressure-sensitive tapes. The system can be configured for a variety of widths and lengths. One or more tape applicators can be mounted to the system, with an application speed of up to 100 feet per minute (30.5 m/min). Standard widths are 4 inch and 6 inch. Systems can be configured to accommodate additional widths upon request.

SD-610 Robot-Mounted Tape Applicator

The SD-610 Robot-Mounted Tape Applicator is designed to handle the demands of 6-axis tape application with robot end-of-arm tooling in mind. The applicator is intended to be mounted on a robot wrist joint. The recommended minimum robot size is 10 kilograms, not limited to depending on the application. Available for ¼ inch (6 millimeters), 3/8 inch (10 millimeters), ½ inch (12 millimeters), ¾ inch (18 millimeters), and 1 inch (25 millimeters) wide tape. Custom widths are available upon request.

SD-610 Robot-Mounted Tape Applicator

The SD-610 Robot-Mounted Tape Applicator is designed to handle the demands of 6-axis tape application with robot end-of-arm tooling in mind. The applicator is intended to be mounted on a robot wrist joint. The recommended minimum robot size is 10 kilograms, not limited to depending on the application. Available for ¼ inch (6 millimeters), 3/8 inch (10 millimeters), ½ inch (12 millimeters), ¾ inch (18 millimeters), and 1 inch (25 millimeters) wide tape. Custom widths are available upon request.

Discover What Straub Design Can Build With You

Give us a challenge. We'll deliver the tape application system or web converting system that's exactly what your business requires. Our engineers have created many custom solutions, from simple machines to complex systems. Contact or give us a call at 952-546-6686 to get started.

We're engineers, inventors and solution seekers. Our engineers have created many custom solutions, from simple machines to complex systems, to meet unique business needs. Give us a challenge. We'll deliver the tape application system or web converting system that's exactly what your business requires.

Resources

Home

Why Straub Design

New Products

Improved Productivity

Case Studies

Gallery

Contact Us

Inquiry Form

Categories

Tape Application Solutions

Custom Solutions

Rapid Response

Parts & Services

Follow Us

LinkedIn

YouTube

Contact

Straub Design Company
4401 Quebec Avenue North
Minneapolis, MN 55428, USA

952-546-6686

Memberships

ATSSA
The Independent Packaging Association
PMMI

Copyright © 2025 Straub Design Company

GDPR Policy

|

Privacy Policy

Made in the USA
Back to Top