The 175 L-clip / C-clip Tape Applicator applies to the top or bottom edges of your product, with a versatile applicator that offers the choice between L or C clip configuration, offering flexibility to meet your specific packaging needs. This product can apply speed up to 100 feet per minute (30.4 m/min).
The 175 L-clip / C-clip Tape Applicator applies to the top or bottom edges of your product, with a versatile applicator that offers the choice between L or C clip configuration, offering flexibility to meet your specific packaging needs. This product can apply tape at speeds up to 100 feet per minute (30.5 m/min).
The DD-250 Dual Drum Flex Circuit Laminator is designed to laminate flexible circuits to heat sinks accurately. It has a flex circuit size minimum of 2” wide x 3½” long and a maximum of 17” wide x 10½” long, depending on the tooling pin location. Larger sizes are available for special applications. The machine application rate is .10”-10” per second.
The HA-200 Hand Applicator is designed to assist and apply VHB Tape
The HA-200 Hand Applicator is designed to assist the operator in manually applying specialty tapes, including VHB, from ⅜ inches to 2 inches wide in an accurate and efficient method. Using this applicator, the operator manually guides the tape to the product using a guide roller to accurately position the tape to the product. Larger tape widths can be applied with modification.
The Model HAG-100 Hand Applicator for Glass and Frames are designed to apply VHB tape from 3/8 inch - 2 inches wide in an accurate and efficient method along the edge of a product. Using these applicators, the operator can manually guide the tape onto a glass panel or frame using a guide to reference the tape to the edge of the products, which is manually cut. One standard applying roller and guide comes with the unit. Standard sizes are ⅜ inch, ½ inch, ¾ inch, 1inch, 1¼ inches, 1½ inches, 1¾ inches, 2 inches.
A wide variety of applicators for tamper-evident taping.
The LWPU Tear Tape Powered Unwind & Applicators are designed to dispense, apply and cut pressure-sensitive tear strip tapes. The tear strip can be applied to overnight envelopes, e-commerce and corrugated products. The LWPU is available with T-626 or T-627 Model applicators. The tape applicator can be mounted over a moving product, conveyor or used on custom-designed taping equipment. Application speeds up to 750 feet per minute (228.6 m/min).
The M-635 Assembly Aid Dispenser aid's users with a turn of the handle break away tape product
Our M-744 Tape Dispenser is an efficient and inexpensive method of dispensing tape
The M-744 Tape Dispenser provides an efficient and repeatable method of dispensing and cutting double and single-coated foam tapes and single and double-coated pressure-sensitive tapes. The pivoting knife arm achieves a positive cut-off, with a tape width of a minimum of ¼ inch (6.0 millimeters) and a maximum of 2 inches (48 millimeters).
The Olympus III Pavement Marking System applies 3M Stamark high-performance pavement marking tape to road surfaces (asphalt and concrete) surface applications. It is designed to be mounted on a contractor’s flatbed truck, with a max application speed recommended at 5 miles per hour. Tape width 4 inches to 10 inches.
Straub Design specializes in Tape Application systems. Our PTA/T-627-2 Flat Surface Tape Applicator is designed for a variety of sensitive tapes. Contact Us today
The S-300 Automatic Tape Splicing Machine is designed to automatically lap splice planetary wound rolls of tape from one roll to the other at up to 300 feet per minute. This machine will operate as a companion to the Model T-627, T-626, or Vacuum Wheel Tape Applicators for high-speed intermittent application of pressure-sensitive tapes. Available for tape roll sizes 6 feet (150 millimeters) maximum on a 3 inch diameter core.
The SD Conveyor System is designed as a universal conveyor and control system to accommodate a variety of Straub Design tape applicators to apply pressure-sensitive tapes. The system can be configured for a variety of widths and lengths. One or more tape applicators can be mounted to the system, with an application speed of up to 100 feet per minute (30.5 m/min). Standard widths are 4 inch and 6 inch. Systems can be configured to accommodate additional widths upon request.
The SD Conveyor System is designed as a universal conveyor and control system to accommodate a variety of Straub Design tape applicators to apply pressure-sensitive tapes. The system can be configured for a variety of widths and lengths. One or more tape applicators can be mounted to the system, with an application speed of up to 100 feet per minute (30.5 m/min).
The SD-2415 Splicer for Level Wound Tape Rolls is designed to automatically splice level wound rolls of tape using a heat bond splicing tab. This machine provides for a continuous lamination process for tape with polyethylene liner at speeds up to 75 feet per minute. Available for tape width of 3/16 inch – 1.25 inches.
The Model SD-4 Conveyor (4 inches wide by 3 feet long) is a universally designed control system to accommodate a variety of Straub Design tape applicators to apply pressure-sensitive tapes. The SD-4 Conveyor can be mounted to the system to apply one or more lanes of tape to the product at speeds up to 100 feet per minute. Tape applicators are available in T-653 Continuous Laminator, T-627, T-626, T-628, and SD-654 (with controls upgrade).
The T-627 Tape Applicator is designed for a wide variety of pressure-sensitive tapes up to 3 inches wide. This product has an application speed up to 250 feet per minute (76.2 m/min). Tape can be applied continuously, or in short strips with gaps to each product as required.
The T-627 Tape Applicator is designed for a wide variety of pressure-sensitive tapes up to 3 inches wide. This product has an application speed up to 250 feet per minute (76.2 m/min). Tape can be applied continuously, or in short strips with gaps to each product as required.
The SD-40/SF-40 Tape Application System with Feeder applies transfer tape with the liner in place and tear strip tape to corrugated or paperboard blacks in widths up to 40". It has the ability to install multiple tape applicators to apply several lanes of tape in one pass, and application speeds up to 500' per minute (153.8 mpm).
The SD-400 Powered Unwind Stand is designed to provide an unwind system for a level would tape with a liner. A liner rewind spindle provides for rewinding the liner as the tape is unwound. Tape Width: Min: .157 inches (4 millimeters); Max: .630 inches (16 millimeters).
The SD-400 Powered Unwind Stand is designed to provide an unwind system for a level would tape with a liner. A liner rewind spindle provides for rewinding the liner as the tape is unwound. Tape Width: Min: 0.157” (4mm); Max: 0.630” (16mm).
SD-400 is a Powered Unwind Stand designed for level wound tape
The SD-6 Conveyor System is designed as a universal conveyor and control system to accommodate a variety of Straub Design tape applicators to apply pressure-sensitive tapes. The system can be configured for a variety of widths and lengths. One or more tape applicators can be mounted to the system, with an application speed of up to 100 feet per minute (30.5 m/min). Standard widths are 4 inch and 6 inch. Systems can be configured to accommodate additional widths upon request.
Our Model SD-6 6 foot conveyor system is designed to accommodate a variety of Straub Tape Applicators, contact Straub to learn more today
Our Model SD-6 6' conveyor system is designed to accommodate a variety of Straub Tape Applicators. Straub has built many machines for the printing and packaging industry over the years and understand that precision and quality are key factors in the application building process. Contact Straub today if you're looking to build a SD-6 Conveyor System or a custom applicator for your industry.
Our Model SD-6 6' conveyor system is designed to accommodate a variety of Straub Tape Applicators.
Our Model SD-6 6' conveyor system is designed to accommodate a variety of Straub Tape Applicators including the solar industry. If you're in the solar industry and need a SD-6 or a custom conveyor system reach out to Straub Design for your next application system.
Our Model SD-6 6' conveyor system is designed to accommodate a variety of Straub Tape Applicators.
The SD-60/SF-60 Tape Application System with Feeder applies transfer tape with liner in place and tear strip tape to corrugated or paperboard blanks in widths up to 60 inches. Multiple tape applicators can be installed to apply several lanes of tape in one pass, with application speeds up to 500 per minute (153.8 miles per minute).
The SD-625 Pad Applicator is perfect for the Labels industry
The SD-625 Pressure-Sensitive Tape Pad Applicator is an economical method to automatically feed, cut, and apply pressure-sensitive tapes. It has a machine cycle time between 40-60 cycles per minute and a tape length tolerance of +1/16 inches, depending upon the length and type of tape.
The SD-625 Pressure-Sensitive Tape Pad Applicator is an economical method to feed, cut, and apply pressure-sensitive tapes automatically. It has a machine cycle time of up to 75 minutes and a tape length tolerance of + 1/16 inches, depending upon the length and type of tape.
The SD-654 Tape Applicator is designed to apply hard-to-cut tapes such as magnetic tape, hook and loop tape, and Velcro® tape to flat surfaces. Tape strips can be applied continuously, or short strips with gaps can be applied to each product as required. The speed is adjustable up to 50 feet per minute.
The SD-658-1-Tape Applicator is designed to apply various lengths of pressure-sensitive (VHB, foam, or butyl) tapes with the liner removed or the liner in place. A rotary knife provides a smooth cut on the ends of the tape. The applicator applies tape to a moving product or can be traversed across the product, which pulls the tape from the applicator. Depending on the product, it has variable speeds of up to 40 feet per minute.
The SD-658-1-Tape Applicator is designed to apply various lengths of pressure-sensitive (VHB, foam, or butyl) tapes with the liner removed or the liner in place. A rotary knife provides a smooth cut on the ends of the tape. The applicator applies tape to a moving product or can be traversed across the product, which pulls the tape from the applicator. Depending on the product, it has variable speeds of up to 40 feet per minute.
The SD-680 automatic tape applicator operates independently or can integrate with your valve bag filling machine to seal the leading edge of the fill valve.
The SD-690 Pavement Marking System applies 3M Stamark high-performance pavement marking tape to road surfaces (asphalt and concrete) surface application. It can be mounted on a contractor's flatbed truck with applicators on both sides of the truck to apply independently or simultaneously. Tape width 4 inches to 12 inches (wider widths available upon request).
The SD-690 Pavement Marking System applies 3M Stamark high-performance pavement marking tape to road surfaces (asphalt and concrete) surface application. It can be mounted on a contractor's flatbed truck with applicators on both sides of the truck to apply independently or simultaneously. Tape width 4 inches to 12 inches (wider widths available upon request).
The SD-691 ADD is a ride-on, self-propelled pavement marking tape application system. Its adjustable rear drive allows tape application on either side – within 6 inches of a curb, and uses the same proven tape applicator as the truck-mounted SD-690 and Olympus III systems.
The SD/SF Tape Application System applies pressure-sensitive tape and tear tape to corrugated or paperboard products. The product can be in sheet or die-cut form in widths up to 60 inches. It can be configured with multiple tape applicators to apply several lanes of tape in one pass at application speeds up to 500 feet per minute (152.4 m/min).
The T-626 Tape Applicator is designed to apply a wide variety of pressure-sensitive tapes up to 12 inches wide (wider widths available upon request). This product has an application speed of 350 feet per minute (106.6 m/min). Tape can be applied continuously, or in short strips with gaps to each product as required.
The T-626 Tape Applicator is designed to apply a wide variety of pressure-sensitive tapes up to 12 inches wide (wider widths available upon request). This product has an application speed up to 350 feet per minute (106.6 m/min). Tape can be applied continuously, or in short strips with gaps to each product as required.
The T-627 Tape Applicator is designed to apply a wide variety of pressure-sensitive tapes to flat surfaces. Tape strips can be applied continuously or short strips with gaps can be applied to each product as required. This tape applicator can be mounted over a moving product, along a conveyor, or used on custom-designed taping equipment moving the tape head across the product.
The T-627 Tape Applicator is designed for a wide variety of pressure-sensitive tapes up to 3 inches wide. This product has an application speed up to 250 feet per minute (76.2 m/min). Tape can be applied continuously, or in short strips with gaps to each product as required.
The T-628 Tape Applicator is designed to apply a wide variety of pressure-sensitive tape to flat surfaces. Tape strips can be applied continuously or short strips with gaps can be applied to each product as required. This tape applicator can be mounted over a moving product on a conveyor or used on custom-designed taping equipment moving the tape head across the product.
The T-646 Tape Application System is a benchtop system that applies strips and/or spots of many types of adhesive transfer, double-coated, and foam tapes to flat surfaces. The product conveying speed is adjustable up to 150 feet per minute. The machine is available in (4) widths: 18 inches, 30 inches, 43 inches, and 55 inches.
The T-653 Continuous Laminator is designed to laminate pressure-sensitive tapes continuously. The T-653 offers a maximum tape width of 12 inches (305 mm). The T-653 is available in two speeds,150 feet per minute (45.7 m/min) and 500 feet per minute (152.4 m/min).
TS-510-C Heat Bond Taping Machine is designed to apply 3M Brand heat activated tape
The TS-510-C Heat Bond Taping Machine is designed to apply 3M brand heat-activated tape in lengths from 6” to 120” to profile extrusions or molded parts for the industrial, consumer, and automotive OEM markets. Heated air is blown onto the heat-activated adhesive and product from an electric heat torch on the applicator.
The VW-1000 High Speed Vacuum Wheel Tape Application System is designed to apply intermittent pieces of pressure-sensitive tapes to individual blanks or webs at speeds of up to 1,000 feet per minute (304.8 m/min). Automatic splicing of the tape provides for continuous running of the machine when a tape roll is depleted.
WL-30 heat bond laminator applies 3M heat activated tapes
The Heat Bond Laminator is designed to apply 3M Brand Heat Activated Tapes to continuous profile extrusions for the industrial, consumer and automotive OEM markets. The tape is unwound and guided over a cooled lamination wheel onto the extrusion. The air cylinder loaded lamination wheel compensates for variations in profile thickness.
The WL-50 Liner Pull Tab Applicator dispenses, cuts and seals 3M #5400 or Y4230 heat bond tabbing film ½” to 1 ¾” wide to the release liner on 3M acrylic foam tape. The tabs are typically applied to the ends of the tape or the joints between tapes for ease in removal of liners exposing the high-strength adhesive.
The WL-50 Liner Pull Tab Applicator dispenses, cuts and seals 3M #5400 or Y4230 heat bond tabbing film ½” to 1 ¾” wide to the release liner on 3M acrylic foam tape. The tabs are typically applied to the ends of the tape or the joints between tapes for easy removal of liners, exposing the high-strength adhesive.
The WL-50 Liner Pull Tab Applicator dispenses, cuts and seals 3M #5400 or Y4230 heat bond tabbing film ½” to 1 ¾” wide to the release liner on 3M acrylic foam tape. The tabs are typically applied to the ends of the tape or the joints between tapes for easy removal of liners, exposing the high-strength adhesive.