Model 175 L-clip / C-clip Tape Applicator

The Model 175 L- & C-clip Taping Machine is designed to apply to 2” wide pressure sensitive tape with 1¾” x 1¾” legs in an L- or C-clip fashion to the leading and/or trailing edges of a box at speeds up to 100’ per minute of a continuous C-clip at speeds up to 125’ per minute as it is advanced through the machine. Tapes can be applied to the top or bottom corners of the product. Controls on the machine are required to signal this machine to apply the tape to either the leading edge and/or trailing edge of the product or in a continuous C-clip fashion. Complete conveyor systems are available to automatically convey the product, apply the L- or C-clip tapes and advance the product in-line onto the client’s conveyor. To learn more Contact Straub today or check out or data sheet below.

Model 175 Specifications

• Compact, easily mounted to the parent frame
• Multiple heads apply one of more L-or C-clips simultaneously
• Applies L- or C- clip to the top or the bottom edges of the product
• Complete L- or C- clip taping systems available
• Want to know about more features? Contact Straub today
• Electrical: 120V, 1Ph, 50/60 Hz,5A
• Air: 80 PSI (550 kPa)
• Size: 20” long x 5” wide x 15” high
• Speed: L Clip Max. – 100’ per minute & C-Clip Max. – 125’ per minute
• Tape: Film – 2” max.; Filament - .5” max.
• Tape Lengths (Leading & Trailing): Legs - 1¾”
  • L-Clip - 1¾” min.
  • C-Clip – Continuous length